Industries Served - Magnetic Metals Corporation https://www.magneticmetals.com Sophisticated Electronic Component Applications Start Here Mon, 31 Mar 2025 16:04:27 +0000 en-US hourly 1 https://www.magneticmetals.com/wp-content/uploads/2022/11/magnetic-metals-logobug-pantone288-1-150x150.png Industries Served - Magnetic Metals Corporation https://www.magneticmetals.com 32 32 235606442 Tape Wound Toroidal Cores for the Electric Vehicle Industry https://www.magneticmetals.com/industries-served/electric-vehicles/?utm_source=rss&utm_medium=rss&utm_campaign=tape-wound-toroidal-cores-for-electric-vehicles Mon, 14 Nov 2022 18:34:07 +0000 https://dev2.magneticmetals.com/?p=829 We are a key supplier of tape wound toroidal cores, transformer assemblies and GFCIs for the growing EV market, as well as EV charging stations. As a unique supplier in the industry, we offer a complete line of the most advanced and highest-grade magnetic materials to accommodate a variety of transformer assemblies.

The post Tape Wound Toroidal Cores for the Electric Vehicle Industry first appeared on Magnetic Metals Corporation.

]]>

Tape Wound Toroidal Cores for the Electric Vehicle Industry

Magnetic Metals is a key supplier of tape wound toroidal cores and ground fault circuit interrupters (GFCI) for the burgeoning electric vehicle (EV) market, as well as EV charging stations.

We are unique in the industry for carrying all types and thicknesses of nickel-iron, amorphous and nanocrystalline materials used in processing standard core sizes and custom tape wound toroidal assemblies. Likewise, we offer a complete line of the most advanced and highest-grade magnetic materials to accommodate a variety of transformer assemblies. This ensures that our products fulfill many applications, while meeting critical dimensional and weight requirements.

Additionally, for more than 40 years, we’ve been manufacturing GFCI products for ground fault protection in housing, surface and underwater vehicles, aircraft, and charging stations.

Our AS9100:2016 Rev D-certified facility in Anaheim can accommodate standard and custom fabrications of any quantity with low-cost efficiency. We also provide technical support, design review and testing from initial concept through production.

For additional information and immediate assistance with your requirements, designs and applications, please call (800) 331-0278 or email webinfo@magneticmetals.com.

GFCI Cores & Transformers for Electric Vehicles

Typical Applications:

– Transformers that power
   EV Charging Stations,
– Transformers that control
   & monitor AC induction &
   DC motor performance,
– Power supplies that charge
   EV battery packs,
– GFCI’s used in Electric
   Vehicles,
– Inductors, converters &
   inverters

Tape wound toroidal cores for electric vehicles applications

The post Tape Wound Toroidal Cores for the Electric Vehicle Industry first appeared on Magnetic Metals Corporation.

]]> 829 Tape Wound Toroidal Cores for Wiring Devices https://www.magneticmetals.com/industries-served/wiring-devices/?utm_source=rss&utm_medium=rss&utm_campaign=tape-wound-toroidal-cores-for-wiring-devices Mon, 14 Nov 2022 18:25:08 +0000 https://dev2.magneticmetals.com/?p=822 We are the largest producer of high-quality GFCI sensor cores in the industry and can supply large volume orders. Our cores and components are used for wiring devices operated in ground circuit interrupters for high-current residential and industrial applications, including charging stations for electric cars.

The post Tape Wound Toroidal Cores for Wiring Devices first appeared on Magnetic Metals Corporation.

]]>

Tape Wound Toroidal Cores for Wiring Devices

Magnetic Metals is the largest producer of high-quality GFCI sensor cores in the industry.  We also have the expertise and capacity to supply the largest volume orders that our customers require. 

For more than 40 years, we have been making cores and components for wiring devices used in ground fault circuit interrupters for high-current residential and industrial applications, including charging stations for electric cars.  Our components are also employed in arc fault and leakage detectors.

As a full-service, one-stop provider, we supply nickel-iron – among other state-of-art materials – and a full spectrum of services, including coating, slitting, stamping, winding, annealing, and custom assembly.  Our AS9100:2016 Rev D-certified facility in Anaheim offers technical support, design review and testing from initial concept through production.  They also accommodate standard and custom fabrications of any quantity and ensure that our products fulfill the performance needs and expectations of current and future wiring devices.

For additional information and immediate assistance with your requirements, designs and applications, please call (800) 331-0278 or email webinfo@magneticmetals.com.

GFCI Cores & Assemblies for Wiring Devices

The post Tape Wound Toroidal Cores for Wiring Devices first appeared on Magnetic Metals Corporation.

]]> 822 Tape Wound Toroidal & Cut Cores for Industrial Controls https://www.magneticmetals.com/industries-served/tape-wound-toroidal-cut-cores-for-industrial-controls/?utm_source=rss&utm_medium=rss&utm_campaign=tape-wound-toroidal-cut-cores-for-industrial-controls Mon, 14 Nov 2022 18:03:54 +0000 https://dev2.magneticmetals.com/?p=817 Using the highest grade materials available to produce tape wound toroidal and tape wound cut cores, we continue to enhance utilities' measurement and monitoring capabilities for electrical grids, industries and residences. We supply all types and thicknesses of nickel-iron, amorphous and nanocrystalline alloys.

The post Tape Wound Toroidal & Cut Cores for Industrial Controls first appeared on Magnetic Metals Corporation.

]]>

Tape Wound Toroidal & Cut Cores for Industrial Controls

For more than seven decades, Magnetic Metals has been producing the magnetic components used in increasingly sophisticated voltage monitoring and measuring electronics.  Today we use the highest-grade materials available to produce tape wound toroidal and tape wound cut cores.  Our products continue to enhance utilities’ measurement and monitoring capabilities for electrical grids, industries and residences.

We supply all types and thicknesses of materials – including silicon-iron (grain-oriented), nickel-iron, cobalt-iron, amorphous and nanocrystalline alloys – used in motor controls, overload protection and current-monitoring equipment.  Our AS9100:2016 Rev D-certified facility in Anaheim provides technical support and design review and testing from initial concept through production, accommodating standard and custom fabrications.  We also offer coating, slitting, core winding, annealing, testing and custom assembly services.

For additional information and immediate assistance with your requirements, designs and applications, please call (800) 331-0278 or email webinfo@magneticmetals.com.

Tape Wound Toroidal & Cut Cores for Industrial Controls

Typical Applications:

– Current transformers
– Voltage transformers
– Voltage monitoring
– Equipment protection
– Motor controls
– Ground Fault Circuit
   Interruptors (GFCI)
– HVAC systems

Tape wound cut cores for industrial controls applications

The post Tape Wound Toroidal & Cut Cores for Industrial Controls first appeared on Magnetic Metals Corporation.

]]> 817 Nickel & Silicon Cores for Telecommunications/Audio https://www.magneticmetals.com/industries-served/nickel-transformer-laminations-for-telecommunications-audio/?utm_source=rss&utm_medium=rss&utm_campaign=nickel-silicon-cores-for-telecommunications-audio Mon, 14 Nov 2022 17:29:18 +0000 https://dev2.magneticmetals.com/?p=813 As a supplier of nickel and silicon tape and cut cores, we have supported the U.S military’s communications equipment needs for more than 70 years. We are a one-stop, full-service supplier, providing coating, slitting, and core winding as well as other services.

The post Nickel & Silicon Cores for Telecommunications/Audio first appeared on Magnetic Metals Corporation.

]]>

Nickel & Silicon Cores for Telecommunications/Audio

For more than 70 years, Magnetic Metals has supported the U.S. military’s communications equipment needs.  And, we’re a critical supplier to General Electric and AT&T.   

At our AS9100:2016 Rev D-certified facility in Anaheim, we provide technical support, design review and testing from initial concept through production, to accommodate standard and custom fabrications and meet the most demanding customer expectations.  We’re also a one-stop, full-service supplier, providing coating, slitting, core winding, annealing and custom assembly services.

For additional information and immediate assistance with your requirements, designs and applications, please call (800) 331-0278 or email webinfo@magneticmetals.com.

Nickel Transformer Laminations for Telecommunications/Audio

Typical Applications:

– Common mode/
   Differential mode chokes
– Transformers
– Isolation Transformers
– Audio signal input/
   output transformers
– Audio power supplies

The post Nickel & Silicon Cores for Telecommunications/Audio first appeared on Magnetic Metals Corporation.

]]> 813 Tape Wound Toroidal & Cut Cores for Aerospace & Defense https://www.magneticmetals.com/industries-served/aerospace-defense/?utm_source=rss&utm_medium=rss&utm_campaign=aerospace-defense Mon, 14 Nov 2022 17:10:21 +0000 https://dev2.magneticmetals.com/?p=807 We produce standard and custom tape wound toroidal and cut cores from advanced-grade magnetic materials. Used in transformers for military power and navigation systems, satellite launch systems, manned space vehicles, and missile guidance systems. We’ve supplied the U.S. military and NASA for over 50 years.

The post Tape Wound Toroidal & Cut Cores for Aerospace & Defense first appeared on Magnetic Metals Corporation.

]]>

Tape Wound Toroidal & Cut Cores for Aerospace & Defense

Magnetic Metals has assisted with the U.S. military’s power and navigation systems for more than 70 years and has been a supplier to NASA for over 50 years.  Our AS9100:2016 Rev D-certified facility in Anaheim is fully equipped to produce standard and custom cores for components used in power supplies, generators, and launch systems for satellites, manned space vehicles, surface-to-air and surface-to-surface missiles.  Our products are also employed in the power supplies and generators for aircraft lighting and entertainment systems.

Magnetic Metals is unique in the industry for carrying all types and thicknesses of materials used to fabricate tape wound toroidal and tape wound cut cores.  These include silicon-iron (grain-oriented), nickel-iron, cobalt-iron, amorphous and nanocrystalline alloys.  Plus, our capabilities ensure that critical dimensional and weight requirements are met.

We offer technical support and design review from initial concept through production to make sure our products fulfill the performance needs and expectations of today’s and tomorrow’s aerospace/defense power and navigation systems. 

For additional information and immediate assistance with your requirements, designs and applications, please call (800) 331-0278 or email webinfo@magneticmetals.com.

Tape Wound Toroidal & Cut Cores and Motor Laminations for Aerospace/Defense

Typical Applications:

– Airborne guidance systems
– Missile guidance systems
– Power supplies
– Lighting controls
– High temperature power supplies
– Instrumentation

The post Tape Wound Toroidal & Cut Cores for Aerospace & Defense first appeared on Magnetic Metals Corporation.

]]> 807 Electronic Components for Medical Applications https://www.magneticmetals.com/industries-served/medical/?utm_source=rss&utm_medium=rss&utm_campaign=medical Sun, 31 Jul 2022 15:18:41 +0000 https://dev2.magneticmetals.com/?p=770 We offer thin- and precision-gauge magnetic components used in power supplies, and voltage and current transformers for a variety of medical electronic devices, including monitors and MRI machines.

The post Electronic Components for Medical Applications first appeared on Magnetic Metals Corporation.

]]>

Electronic Components for
Medical Applications

Magnetic Metals offers thin- and precision-gauge materials in thicknesses from .0005 to .014 inches. These materials are used in power supplies, and voltage and current transformers for a variety of medical electronic devices, including monitors and MRI machines. We also carry all types of materials for magnetic components, including silicon-iron (grain-oriented), nickel-iron, amorphous and nanocrystalline alloys.

From initial concept through production at our AS9100:2016 Rev D-certified facility in Anaheim, we provide ongoing technical support, review and testing to guarantee that our tape wound toroidal and tape wound cut cores meet critical design requirements and stringent performance expectations.  Additionally, we handle a full spectrum of standard and custom services, including coating, slitting, core winding, annealing, testing and custom assembly services.

For additional information and immediate assistance with your requirements, designs and applications, please call (800) 331-0278 or email webinfo@magneticmetals.com

Electronic Components for Medical Applications

Typical Applications:

– Common mode/
   Differential mode chokes
– Shields
– Power supplies
– Inductors
– Chokes
– Transformers

The post Electronic Components for Medical Applications first appeared on Magnetic Metals Corporation.

]]> 770